 |
||
| @@ |
Digital-type@gjr|TOOP
|
Air-cylinder type
|
| Drive method | @Servomotor and ball screw | @Aircylinder and linear motion bearing |
| Supply | @`b100V only | @Compressed air and AC100V |
| Pressure consistency | @Constantly consistent | @Cylinder pressure not consistent due to @fluctuating airsupply |
| Operating panel | @Liquid-crystal touch panel | @Push-button switch and air control valve |
| @Accumulating number of processed @work-piece indicated |
@None | |
| @Error indicated when work-piece is not set @and heater is disconnected |
@None | |
| User-settable caulking conditions | @Temperature | @Temperature |
| @Time to maintain pressure | @Time to maintain pressure | |
| @Pressure 10N`500N | @Pressure 70miwhen decompression @valve usedj`400m |
|
| @Pressure limitation or pressure stop @position control |
@Pressure cannot be controlled, @pressure is stopped when work-piece is @pressed or pressure can be stopped @mechanically |
|
| @Self-teaching function | @Control position self-teaching | @None |
 |
||
| @@ |
Thermo-caulking machine
|
Ultrasonic-wave caulking machine
|
| Heating method | @Jig heated by heater | @Heated by ultrasonic-wave oscillator |
| @@Thermo-caulking @method | @Heating resin and deforming it with pressure. | @Melting resin with ultrasonic wave and @ deforming it with pressure. |
| @c @@@ | @As heating can be minimized, the thermo- @caulking machine is suitable for thinly @caulking lens frame and minimal boss @caulking of tiny electric parts. |
@Good to bond resin parts each other @because they are melted. |
| @As the machine can only deform resin with @heat, adhering or joining not possible. |
@As ultrasonic-wave caulking can be done @with relatively strong pressure in a short @time, it is suitable for boss-caulking large @resin parts. |
|
| @As there is not dust generated, our @thermo-caulking machine is suitable for @caulking precision parts. |
@There may be some dust generated, and @caulking may erode the work-piece. |
|
| @Electronic parts, which are included in the @work-piece, are not damaged. |
@Work-piece including parts built-in @ electronic parts may be damaged by @ ultrasonic wave. |
|
| @As horn's structure is simple, there are @relatively little trouble. |
@The work-piece may have cracks due to @ultrasonic wave. |
|
